Pasco PS-2143 Quad Temperature Sensor Manuel d'utilisateur télécharger pdf

Instruction Sheet

012-08656D

Quad Temperature Sensor

PS-2143

*See the PASCO catalog or the PASCO web site at www.pasco.com

for more information.

Introduction

The PS-2143 Quad Temperature Sensor measures tempera-

ture from up to four temperature probes simultaneously in

units of degrees celsius, fahrenheit, and kelvin (°C, °F, °K).

The sensor includes two Stainless Steel Temperature Probes

(PS-2153), three Fast Response Temperature Probes

(PS-2135), a piece of polyurethane tubing, and a sheet of

adhesive disk covers. The tubing can be used when a Stain-

less Steel Temperature Probe is inserted into a stopper, and

the adhesive disk covers can be used to hold the end of a Fast

Response Temperature Probe in place.

The sensor is designed to work with a PASPORT-compatible

interface and PASCO data acquisition software (such as

PASCO Capstone) to measure temperature.

Setup the Sensor

• Plug the sensor into one of the PASPORT input ports of

a PASCO PASPORT-compatible interface.

NOTE: If more distance is needed between the sensor and

the interface, plug the sensor into a Sensor Extension Cable,

and then plug the cable into the interface.

• Plug one or more temperature probes into the sensor.

• Start the PASCO data acquisition software.

Objects are not to scale.

Fast Response Temperature Probe

Stainless Steel Temperature Probe

Included Items

Quad Temperature Sensor

Stainless Steel Temperature Probe (2)

Fast Response Temperature Probe (3)

Polyurethane Tubing (0.3 m)

Adhesive Cover Disks (1 sheet)

Required Items*

PASCO Interface

PASCO Data Acquisition Software

Résumé du contenu

Page 1 - Quad Temperature Sensor

Instruction Sheet012-08656DQuad Temperature SensorPS-2143.*See the PASCO catalog or the PASCO web site at www.pasco.com for more information.Introduct

Page 2 - Technical Support

Quad Temperature Sensor Specifications2Using PASCO Capstone Software• Click the “Hardware Setup” icon in the Tools palette to open the “Hardware Setup