Pasco PS-2162 2-Axis Magnetic Field Sensor Manuel d'utilisateur télécharger pdf

Instruction Sheet

012-09324B

2-Axis Magnetic Field Sensor

PS-2162

Zero-gauss

Chamber

Introduction

Use the PASPORT 2-Axis Magnetic Field Sensor in conjunction

with a PASPORT interface to measure magnetic field strength

simultaneously along two perpendicular axes.

The sensing elements are two Hall Effect devices oriented per-

pendicularly to one another and located at the end of the sensor’s

probe. The sensor measures the magnetic field in the Axial and

Perpendicular directions as illustrated. Two white dots on the

probe mark the positions of the sensing elements.

Setup

Connect the sensor to a PASPORT interface, either directly or

using the included extension cable. If you will be using a com-

puter, connect the interface to it and start DataStudio or

EZ-Screen software.

Optional: If you have a zero-gauss chamber (part EM-8652),

insert the probe into the chamber and press the Tare but-

ton on the sensor to zero both measurements. For

greatest accuracy, tare the sensor in this way

after it has been connected to a powered

interface for a few minutes.

Axial

Perpendicular

2 AXIS MAGNETIC FIELD

Included Equipment Part Number

2-Axis Magnetic Field Sensor

PS-2162

PASPORT Extension Cable

PS-2500

Sensor Handle

648-08372

Required Equipment

PASPORT Interface

1 See PASCO catalog

or www.pasco.com

Optional Equipment

Zero Gauss Chamber

EM-8652

Compatible PASPORT interfaces include the Xplorer (PS-2000), Power-

link (PS-2001), Xplorer GLX (PS-2002), USB Link (PS-2100), and oth-

ers. See the PASCO catalog, visit www.pasco.com, or contact PASCO

tech support for more information.

Axial

Perpendicular

Probe

1 2

2-Axis Magnetic Field Sensor 1

Résumé du contenu

Page 1 - 2-Axis Magnetic Field Sensor

®Instruction Sheet012-09324B2-Axis Magnetic Field SensorPS-2162FORUSEWITHPACHAMBERZERO003-07MAGNETICFIELZero-gaussChamberIntroductionUse the PASPORT 2

Page 2

®Model No. PS-2162 Measuring Magnetic Field2Note: If you do not have a zero-gauss chamber, pressing the Tare button may result in a small offset to s

Commentaires sur ces manuels

Pas de commentaire

Pasco PS-2162 2-Axis Magnetic Field Sensor Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Pasco PS-2162 2-Axis Magnetic Field Sensor. PASCO PS-2162 2-Axis Magnetic Field Sensor User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Pasco PS-2162 2-Axis Magnetic Field Sensor