®
Instruction Sheet
012-09741A
Galvanometer
PS-2160
Introduction
The PASPORT Galvanometer is a high-resolution,
high-impedance voltage sensor for use with PASPORT inter-
faces. It measures differential voltage in the range of −2 V to
+2 V. It can also be used in combination with a resistor as a
current sensor.
Sensor Set-up
Connect the Galvanometer Sensor to a PASPORT interface. If
you are using a computer, start DataStudio.
For measuring voltage, connect the included cable or binding
post adapter to the sensor's BNC connector, or connect a
device to the Galvanometer with a BNC cable.
Before making a measurement, short the + and − inputs
together and press the Tare button on the sensor. This adjusts
the sensor's measurement to 0 V.
G
A
L
V
A
N
O
M
E
T
E
R
S
E
N
S
O
R
PS-2160
T
A
R
E
Included Equipment Part Number
Galvanometer PS-2160
BNC-to-banana plug cable 514-015
BNC-to-binding post adapter 515-012
Resistor, 10 Ω, 5 W, 5% 111-100
Resistor, 0.1 Ω, 3 W, 1% 130-019
Required Equipment
PASPORT Interface
1
See PASCO catalog or
www.pasco.com
1
PASPORT interfaces include the AirLink (PS-2005), Xplorer GLX
(PS-2002), Xplorer (PS-2000), PowerLink (PS-2001), and USB Link
(PS-2100)
G
A
L
V
A
N
O
M
E
T
E
R
SENSOR
PS-2160
TAR E
PASPORT Interface
Tare Button
Connect BNC
cable or adapter
Commentaires sur ces manuels