Pasco PS-2125 Temperature Sensor Manuel d'utilisateur télécharger pdf

Instruction Sheet

012-07971E

Temperature Sensor

PS-2125

*See the PASCO catalog or the PASCO web site at www.pasco.com

for more information.

Introduction

The PS-2125 Temperature Sensor measures temperature in

degrees fahrenheit (°F) or celsius (°C), or in kelvin (K). The

included Stainless Steel Temperature Probe has a wide

range, and the included tubing allows the probe to fit inside a

standard 0.25” diameter stopper hole.

The sensor is designed to work with a PASPORT-compatible

interface (such as the UI-5100 850 Universal Interface) and

PASCO data acquisition software (such as PASCO Capstone

or SPARKvue) to measure temperature.

Optional Temperature Probes

The sensor can also be used with other temperature probes.

(See the PASCO catalog or visit www.paseo.com for more

information.).

The Fast Response Temperature Probe has a smaller size and

thermal mass and a range from -30 to 105 °C. The Skin/Sur-

face Temperature Probe has a range from -10 to 70 °C.

Sensor Usage

• Do not place the sensor box or the cable of the probe in

liquids.

• Do not place the probe in a flame or on a hot plate.

• Do not use the probe in liquids other than water or

mildly acidic solutions*.

(*Put a Teflon Sensor Cover - available separately - on the

probe if you plan to use it with strong acids, etc. The cover

has a Chemical Resistance Classification of “E” (acetalde-

hyde to zinc stearate.))

Stainless Steel

Temperature

Probe

Temperature

Sensor Box

Included Items

Temperature Sensor

Stainless Steel Temperature Probe PS-2153

Polyurethane tubing, 1/4” O.D. (not shown)

Required Items*

PASCO Interface

PASCO Data Acquisition Software

Other Items*

Teflon Sensor Covers CI-6549 (pack of 10)

PASPORT Sensor Extension Cable PS-2500

Other Temperature Probes

Fast Response Temperature Probe PS-2135

Skin/Surface Temperature Probe PS-2131

1 2 3

Résumé du contenu

Page 1 - Temperature Sensor

Instruction Sheet012-07971ETemperature SensorPS-2125.*See the PASCO catalog or the PASCO web site at www.pasco.com for more information.IntroductionTh

Page 2 - Calibrating the Sensor

Temperature Sensor Introduction2Setup the Sensor• Plug the sensor into a PASPORT input port of a PASCO PASPORT-compatible interface.NOTE: If more dist

Page 3 - Technical Support

Model No.PS-2125 Specifications3• For step 5, put the probe and thermometer into hot water (boiling hot, if available). When the thermometer reaches