Pasco TD-8595 Absolute Zero Apparatus Manuel d'utilisateur télécharger pdf (Page 6)

Model No. TD-8595 Absolute Zero Apparatus

Equipment Setup (for use with DataStudio)

1. Plug the Fast Response Temperature stereo plug into a PASPORT Temperature Sensor box or

into a ScienceWorkshop Thermistor Sensor.

2. PASPORT users: Plug the Temperature Sensor box into a PASPORT interface.

Science Workshop users: Plug the Thermistor Sensor into a ScienceWorkshop interface.

3. Connect the Pressure port connector to a Pressure Sensor. Plug the Pressure Sensor into

the computer interface.

4. Set up your experiment in DataStudio. In DataStudio, open a Graph display and plot

temperature vs. pressure. Use manual sampling, with no keyboard input. (For detailed

software setup instructions, See Appendix B of this manual.)

5. Submerge the sphere into a bucket of ice water.

6. In DataStudio software, click the Start button to begin collecting data. (For suggested

experiments, see pages 6 to 9 of this manual.)

Using the Absolute Zero Apparatus with a PASPORT Xplorer

The Absolute Zero Apparatus can be used with one or more Xplorers. If measuring both the

pressure and the temperature with a combination Pressure/Temperature Sensor, you only need

one Xplorer. If measuring both the pressure and temperature with two sensors, you will need

at least two Xplorers.

1. Plug the stereo plug of the Fast Response Temperature Sensor into a PASPORT Temperature

Sensor box.

2. Plug the Temperature Sensor into the first Xplorer.

3. (Optional): Connect the Pressure port connector to a Pressure Sensor. Then connect the

Pressure Sensor to a PASPORT interface. Plug the Pressure Sensor into a second Xplorer.

4. Grasp the handle and submerge the sphere into the container of ice water.

5. In your Xplorer(s), press the Start/Stop button to begin collecting data.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Pas de commentaire

Pasco TD-8595 Absolute Zero Apparatus Manuel d'utilisateur Page 6