Pasco PS-2174 Weather_Anemometer Sensor Manuel d'utilisateur télécharger pdf

Instruction Sheet

012-09911D

Weather/Anemometer Sensor

PS-2174

Quick Start

1. Connect the Weather/Anemometer Sensor to your PASPORT

interface.

2. If you are using a computer, connect the PASPORT interface

to it and start DataStudio.

3. Shield the sensor from direct sunlight.

4. Hold the sensor so that so that air flows into the rear of the

windmill.

5. Press or click the start button to begin recording data.

Introduction

The Weather/Anemometer Sensor measures

• wind speed,

• air temperature,

• relative humidity, and

• barometric pressure.

From these primary measurements it calculates

• wind gust speed

• dew point

• humidex

• wind chill, and

• absolute humidity.

The sensor connects to a PASPORT interface. If it is a logging

interface (such as Xplorer or Xplorer GLX) in standalone mode,

data are recorded and displayed on the interface itself. If the PAS-

PORT interface is connected to a computer, data are recorded and

displayed on the computer in DataStudio.

Set-up

Connect Sensor to Interface

Plug the sensor into any port of your PASPORT interface, either

directly or using the PASPORT extension cable (PS-2500).

Sensor Positioning

• Optional: Screw a 1/4-20 threaded rod (such as CI-9874) or

tripod into the mounting hole on the back of the sensor and

mount it as illustrated (Figure 1).

• Hold (or mount) the sensor vertically so that air flows into

the rear of the windmill (Figure 1).

• Shield the sensor from direct sunlight.

Windmill

Anemometer

Humidity

Transducer

Temperature

Transducer

Included Equipment Part Number

Weather/Anemometer Sensor PS-2174

PASPORT Extension Cable PS-2500

Additional Equipment Required

PASPORT Interface See page 4

Replacement Parts

Replacement Impeller PS-9879

Weather/Anemometer Sensor

PS-2174

1 2 3 4

Résumé du contenu

Page 1 - Weather/Anemometer Sensor

®Instruction Sheet012-09911DWeather/Anemometer SensorPS-2174Quick Start1. Connect the Weather/Anemometer Sensor to your PASPORT interface.2. If you ar

Page 2 - Data Collection

®Weather/Anemometer Sensor PS-21742 Figure 1: Mounting options and air flow directionInterface and Software Configuration (Optional)The interface or

Page 3 - About the Measurements

®Weather/Anemometer Sensor PS-217432. Click Stop to stop monitoring data.To Record Data1. Click Start. DataStudio starts recording data.2. Click Stop

Page 4 - Compatible Interfaces

®Weather/Anemometer Sensor PS-21744where is the saturation water vapor pressure, RH is Relative Humidity (as a percentage), and T is Temperature in

Commentaires sur ces manuels

Pas de commentaire

Pasco PS-2174 Weather_Anemometer Sensor Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Pasco PS-2174 Weather_Anemometer Sensor. PASCO PS-2174 Weather_Anemometer Sensor User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Pasco PS-2174 Weather_Anemometer Sensor