Pasco OS-9102C INCANDESCENT LIGHT SOURCE Manuel d'utilisateur télécharger pdf

Instruction Manual for

the PASCO scientific

Model OS-9102C

INCANDESCENT LIGHT SOURCE

012-07133A

5/99

$2.00

Operating Instructions

1. Place the light source on the optical bench with its

steel pads on the bottom touching the magnetic strips

on the bench, and its back edge pressed up against the

alignment rail of the optical bench. To minimize

bending of the optical bench, it is advisable to place

the light source near one end of the bench.

2. Connect the light source to the 12 VDC, 2.5 A power

supply provided. Connect the AC line cord to the

power supply and to an appropriate power source.

3. When necessary, adjust the large knob on top of the

light source to align the bulb filament along the optical

axis of the optical bench. The bulb filament will move

in the same direction that the knob is turned.

4. Mount filters, apertures, variable diaphragms, etc. on

the magnetic surface of the front panel.

Description

The PASCO Scientific Incandescent Light Source, OS-

9102C is intended to be used by students in an educational

environment to perform experiments in basic optics.

The Incandescent Light Source produces a light output of

approximately 15 candle power in the visible spectrum. It

is powered by a very stable, well-regulated power supply

that ensures the light source output will not drift in

intensity. The output is bright enough and stable enough to

perform demanding experiments such as investigations into

Young's coherence.

The Incandescent Light Source mounts magnetically to the

PASCO Introductory and Advanced Optics System's optical

benches. A knob is provided on the top of the unit to adjust

the filament position of the lamp.

INCANDESCENT LIGHT SOURCE

Phone (916) 786-3800 • FAX (916) 786-8905 • email: techsupp@PASCO.com

10101 Foothills Blvd. • P.O. Box 619011 • Roseville, CA 95678-9011 USA

better

teach science

ways to

1 2 3 4

Résumé du contenu

Page 1 - INCANDESCENT LIGHT SOURCE

Instruction Manual forthe PASCO scientificModel OS-9102CINCANDESCENT LIGHT SOURCE012-07133A5/99$2.00Operating Instructions1. Place the light source on

Page 2 - Power Supply Specifications

2012-07133AReplacement of bulbs1. Turn light source switch to OFF and disconnect thepower cord.2. Remove the four screws from the front panel (the pan

Page 3 - 012-07133A

3012-07133AEquipment ReturnShould the product have to be returned to PASCOscientific for any reason, notify PASCO scientific byletter, phone, or fax B

Page 4 - Technical Support

4012-07133ATechnical SupportFeedbackIf you have any comments about the product or manual,please let us know. If you have anysuggestions on alternate e

Commentaires sur ces manuels

Pas de commentaire

Pasco OS-9102C INCANDESCENT LIGHT SOURCE Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Pasco OS-9102C INCANDESCENT LIGHT SOURCE. PASCO OS-9102C INCANDESCENT LIGHT SOURCE User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Pasco OS-9102C INCANDESCENT LIGHT SOURCE